Powerful Pump Automation


Operate at peak performance and extend pump life



Dynamic Pump Optimizer

Extend pump life while minimizing energy consumption. Schedule pump repairs based on financial metrics.

Lift Station Guardian

Remotely configure and monitor lift station operations. Experience peace of mind with redundant control using hard-wired logic.

The Ultimate Platform for
Pump Station Control and Analytics


Specific Energy’s principals have over 110 years of combined experience in civil engineering, pump and lift station design, pump station optimization, industrial automation, computer science, process control, and international research and development.

Dynamic Pump Optimizer

image/svg+xml Any combinationof pumps or system constraints Secure access to real-time data anywhere PLC DPO

What is a DPO?

Take the guess work out of pump station operation by installing the Dynamic Pump Optimizer (DPO).

The DPO is an edge device with an analytics platform designed to be installed at a pump station. The edge device communicates with an existing PLC to collect high resolution data. Operators can monitor their pump station through a web interface and make informed operating decisions or allow the DPO to automatically optimize station operation.





Extend Pump Life

Proper pump operation can drastically increase the life span of pumps. The DPO will automatically run pumps within their green zones or advise operators to run the pumps at proper speeds.

Automatically perform accurate, repeatable pump tests with the click of a button and track pump condition over time.





image/svg+xml 1 2 3 4 Flow 525 gpm Specific Energy289 kWh/MG Health Index70% Repair NPV$10,580

Schedule repairs with financial metrics

Receive a monthly pump station report with calculated Net Present Value and Return on Investment for pump repairs.

Managers can use these reports to schedule repairs and expedite the procurement process.





image/svg+xml Flow Head Efficiency Pump Damage Zone Pump Damage Zone Preferred Operating Range

Minimize Energy Consumption

Define pump station goals and allow the DPO to continually compute optimal combinations of pumps and speeds to meet demand and keep pumps within the Green Zone.





Select Your Operating Mode

Automatic Mode
Your PLC uses recommendations from the DPO to operate the pump station.

Advisory Mode
Operators start pumps and choose speeds based on recommendations from the DPO.

Technical Specifications

Lift Station Guardian

image/svg+xml UPS PLC DPO Pump 1 Pump 2 Pump 3 Secure access to real-time data anywhere

What is the Lift Station Guardian?

The Lift Station Guardian (LSG) is a plug-and-play panel for wastewater lift stations.

The standard panel design means spare parts, installation, and maintenance are identical across sites for ease of operation and maintenance.

Within the panel, the edge device communicates with the PLC to collect high resolution data and performs primary monitoring and control functions. Operators can monitor the status of their lift stations through a web interface.





image/svg+xml 11 12 High: 12.19 Start: 11.50 Start: 10.90 Stop: 4.90 Stop: 4.30